UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19435

6.2i iMPACT - Programming xc1800 PROM with Automatic Checksum Insertion enabled results in "ERROR:iMPACT:583"

描述

General Description:

When I program xc1800 PROMS when Automatic Checksum Insertion is enabled, iMPACT displays the following error:

"'1': Setting usercode...

done.

ERROR:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.

INFO:iMPACT:1578 - '1': Device IDCODE : 00001111111111101111111111111111

INFO:iMPACT:1579 - '1': Expected IDCODE: 00000101000000100100000010010011

'1': Setting user-programmable bits...

done.

'1': Putting device in ISP mode...

done."

This error does not occur when I program User Code or when Automatic Checksum Insertion is disabled.

解决方案

This problem has been fixed in the latest 6.2i Service Pack available at:

http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 6.2i Service Pack 3.

AR# 19435
日期 12/15/2012
状态 Active
Type 综合文章
的页面