UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19507

6.3 System Generator for DSP - Why do I receive an error message specifying that my non-memory mapped ports cannot be found when doing JTAG Hardware in the Loop Co-Simulation?

描述

General Description: 

Why do I get an error message specifying that my non-memory mapped ports cannot be found when doing JTAG Hardware in the Loop Co-Simulation?

解决方案

When creating non-memory mapped ports, ensure you do the following: 

 

1. Create a library and add a gateway. 

2. Name the gateway with the name of your board specific port (this name must match the port name used in the post-generation function and UCF file). 

3. Select the gateway by clicking it. 

4. In the MATLAB command window, type the following: 

>> xlSetNonMemMap(gcb, 'Xilinx', 'jtaghwcosim'); 

5. Save the library. 

 

You can find more information about JTAG Hardware in the Loop Co-Simulation under the Using FPGA Hardware in the Loop of the System Generator for DSP Users Guide. 

 

http://www.xilinx.com/products/software/sysgen/app_docs/user_guide.htm

AR# 19507
日期 05/16/2014
状态 Archive
Type 综合文章
的页面