We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19511

MultiPRO Cable - iMPACT appears to hang during firmware upgrade


When I use 8.1i iMPACT with a MultiPRO cable, a firmware upgrade is performed automatically. The process takes longer than several minutes and appears to hang. When I close iMPACT or disconnect my cable, the cable is no longer recognized and the pod lights do not work.


The firmware upgrade can take over five minutes to complete. Aborting the firmware upgrade by closing iMPACT, disconnecting the cable, or removing the power source leaves the cable in an unknown state. iMPACT cannot recognize the cable and the pod LEDs do not light up. You can download a field fix at: 


If the cable is still not detectable by iMPACT after running these files, contact Xilinx support to request a cable RMA.

AR# 19511
日期 05/16/2014
状态 Archive
Type 综合文章