We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19775

6.2 EDK - Block Diagram Editor does not connect interrupts properly


Keywords: EDK, XPS, PBD, Interrupts

Urgency: Standard

General Description:
Instantiate an OPB Interrupt Controller in the PBDE:

1. Click Object Properties -> Interrupts.
2. Add interrupts from other IPs such as debug_module, RS232, and so forth.
3. Click OK.

On clicking OK, it is expected that the interrupt ports are written out for the debug_module and RS232. These ports then need to be connected to the Interrupt Controllers Intr Port. The connection to the INTR port of the interrupt controller does exist, but the interrupt port connections from the debug_module and RS232 are not present.


Interrupts can be connected using the Add/Edit Cores dialog or the MHS file directly.

This will be fixed in a future software release.
AR# 19775
日期 04/28/2006
状态 Archive
Type 综合文章