UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19861

6.3i UniSim, SimPrim, Simulation - Virtex-4 DCM CLKFX is not properly aligned when Locked signal goes high

描述

Keywords: UniSim, simulation, ModelSim, NC-VHDL, DCM, Virtex-4, VCS, CLKFX, align, locked

Urgency: Standard

General Description:
The Virtex-4 DCM and output clocks (CLK0, CLk2x, CLKDV and CLKFX) are not aligned correctly. The rising edges of these outputs should be aligned, but CLKFX starts one input clock cycle early; therefore, the CLKFX edge is not correctly aligned when the locked signal goes High.

解决方案

This problem has been fixed in the latest 6.3i Service Pack available at:
http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 6.3i Service Pack 1.
AR# 19861
日期 11/18/2008
状态 Archive
Type 综合文章
的页面