UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19972

Spartan-IIE/-3 - Simultaneous Switching Output (SSO) guidelines for LVDS and LVPECL

描述

The Xilinx Application Note 179 (Xilinx XAPP179), "Using SelectI/O Interfaces in Spartan-II and Spartan-IIE FPGASs" does not include entries for LVDS and LVPECL. What is the recommended maximum number of SSOs for these signals?

Are there SSO guidelines for Spartan-3?

解决方案

NOTE: For a detailed discussion on handling SSOs, see (Xilinx XAPP689): "Managing Ground Bounce in Large FPGAs."

For SSO guidelines, use these substitutions:

Spartan-IIE, LVDS: one output pair = one LVTTL 2mA driver with fast slew rate

Spartan-IIE, LVPECL: one output pair = one LVTTL 24mA driver with fast slew rate

The Spartan-IIE SSO guidelines are provided in (Xilinx XAPP179). Select "Design Considerations" -> "Simultaneous Switching Guidelines".

Because the Spartan-3 LVDS driver is very balanced, its switching causes a negligible amount of transient current. As a result, SSOs are typically not a problem in the smaller device/package combinations. However, SSO does become a concern with the larger device/package combinations so please be aware of the SSO guidelines for Spartan-3.

The Spartan-3 SSO guidelines are provided in the "Spartan-3 DC and Switching Characteristic" Data Sheet located at:

http://www.xilinx.com/xlnx/xweb/xil_publications_display.jsp?sGlobalNavPick=&sSecondaryNavPick=&category=-1209725&iLanguageID=1

Select "Switching Characteristics" -> "Simultaneous Switching Output Guidelines".

AR# 19972
日期 12/15/2012
状态 Active
Type 综合文章
的页面