UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20080

BitGen - Why is there an option to set the configuration rate to 100 MHz for Spartan-3?

描述

Keywords: BitGen, ConfigRate, clock, CCLK, GUI, Fccser, Fccpar

In the Project Navigator GUI under "Generate Programming File Properties", there is an option to set the configuration rate to 100 MHz. According to the "Spartan-3 FPGA DC and Switching Characteristics" data sheet, a 100MHz configuration rate is not a supported configuration frequency as defined by the parameters Fccser and Fccpar.

The "Spartan-3 FPGA DC and Switching Characteristics" data sheet is located at:
http://www.support.xilinx.com/xlnx/xweb/xil_publications_display.jsp?sGlobalNavPick=&sSecondaryNavPick=&category=-1209725&iLanguageID=1

解决方案

The Spartan-3 configuration logic does not support a configuration frequency of 100MHz; consequently, the 100MHz option should not be an option in the Project Navigator GUI.

This problem has been fixed in the latest 6.3i Service Pack available at:
http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 6.3i Service Pack 2.

AR# 20080
日期 09/12/2007
状态 Active
Type 综合文章
的页面