We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20228

6.3 EDK Install - Service Pack 1 Release Notes/README


Keywords: Unix, PC, Linux, software, update, SP1, 6.3i

Urgency: Standard

General Description:
This README Answer Record contains the Release Notes for EDK 6.3 Service Pack 1 (SP1), which includes installation instructions and a list of the issues that are fixed by this Service Pack for the 6.3 release.



EDK 6.3i SP1 requires a valid ISE 6.3i SP2 or greater installation.

A successful installation of Xilinx EDK 6.3 SP1 updates your software version number to 6.3.1.

- The destination directory specified during the setup operation must contain an existing Xilinx EDK 6.3 installation. Only existing files will be updated.
- Set the Xilinx EDK 6.3 environment variable before commencing the installation of SP1.

Download installation instructions for PC users:
1. Download EDK_6_3_1_win.exe from:
2. Run "EDK_6_3_1_win.exe"

Download installation instructions for Solaris users:
1. Download EDK_6_3_1_sol.zip from:
2. Unzip EDK_6_3_1_sol.zip it into your $XILINX_EDK area

Download installation instructions for Linux users:
1. Download EDK_6_3_1_lin.zip from:
2. CD to the root of the 6.3 EDK installation
3. Run the following command:
/usr/bin/unzip <path to the EDK_6_3_1_lin.zip file>
4. When prompted to overwrite files, answer All


Issues Fixed by 6.3 EDK SP1
6.2 EDK MicroBlaze Caches - How do I calculate the tag address size for the instruction and data caches? See (Xilinx Answer 19371).

6.3 EDK - XMD issues the following warning: "Unable to Check Memory for PPC 0". See (Xilinx Answer 19872).

6.3 EDK - BSB creates system with sourceless connectors. See (Xilinx Answer 20229).

6.3 EDK BSB - Custom board generation via the BSB does not pull out DDR_WEn pin for some DDR devices. See (Xilinx Answer 20230).

6.3 EDK Proc_IP - The fsl_v20_v1_00_b and isocm_v10_v2_00_a are mission library declarations in the IP. See (Xilinx Answer 20231).

6.3 EDK - Address Generator crashes when input address does not meet minimum requirement. See (Xilinx Answer 20233).

6.3 EDK XMD generates the following error in calc_profilemem.tcl: "Error :: invalid command name "pura"." See (Xilinx Answer 20234).

6.3 EDK XMD - XCF08P and XCF16P devices are not listed in devicetable.lst. See (Xilinx Answer 20235).

6.3 EDK - Revup issues the following error: "The procedure entry point ??0Coreu_Xlicmgr@@QAE@XZ could not be located in the dynamic link library libCoreu_Interface.dll." See (Xilinx Answer 19987).

6.2i EDK - SimGen problems with the Ultracontroller Example. See (Xilinx Answer 20236).

6.3 EDK BSB - The Ethernet Phy LEDs on the Memec P160 Comm Module turn off as soon as the device is programmed when using the EMAC Lite. See (Xilinx Answer 20062).

6.3 EDK BSB - The UCF file generated for the Spartan-3 board is incorrect. See (Xilinx Answer 20082).

6.3 EDK XMD - XMD command "ppcconnect" fails to connect to the PowerPC. See (Xilinx Answer 20094).

6.3 EDK - GEMAC v1_00_f driver makefile does not copy all header files. See (Xilinx Answer 20237).

6.3 EDK - Tornado 2.2 BSP templates v1.01a do not contain support for EMAC Lite. See (Xilinx Answer 20238).

6.2 EDK - The FIT timer does not generate an Interrupt output. See (Xilinx Answer 19421).
AR# 20228
日期 04/11/2007
状态 Archive
Type 综合文章