We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20240

LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII v5.0 Core - Incorrect alignment when "MGT CRC Enabled" is used results in incorrect IDLE generation


The Virtex-II Pro MGTs require that the transmitted /K28.5/ is left-justified in the MGT's internal two-byte data path to ensure that the CRC logic correctly generates IDLEs. 

However, a problem exists in the Ethernet 1000BASE-X PCS/PMA or SGMII v5.0 Core in which this alignment is not correct.

Note: this is only an issue if the "MGT CRC Enabled" option is set to true in CORE Generator.

Otherwise, the CRC logic should be created in FPGA fabric. For example, the CRC logic is implemented inside the Gigabit Ethernet MAC and Tri-Mode Ethernet MAC cores, and this is not an issue.


A patch is available that fixes this issue with the RocketIO transceiver wrappers (transceiver.vhd and transceiver.v).

Specifically, to ensure correct alignment (left justification) of the /K28.5/ character in the RocketIO internal data path, an extra layer of registers have been added between the Core netlist and the RocketIO transceiver instantiated from the example design. 

This delays the following RocketIO signals by an extra TXUSRCLK2 period to force the correct alignment of the packet delimiters:


To obtain this fix, please install the patch that is available in the LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII v5.0 Core Release Notes and Known Issues Answer Record (Xilinx Answer 68298).

AR# 20240
日期 02/21/2017
状态 Active
Type 综合文章
  • Ethernet 1000BASE-X PCS/PMA or SGMII