UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20422

6.3 Speed File/Timing - What has changed in the Virtex-4 version 1.50 of the Speed File?

描述

Keywords: version, 1.50, speed, file

Urgency: Standard

General Description:
What has changed in version 1.50 of the Virtex-4 Speed File?

解决方案

Timing values associated with the FIFO16 and the PCI Core changed in the Speed File.

For OSERDES, when 3-state ports are used in BUF mode, the setup/hold checks are not checked with respect to T1 and CLK anymore. Since 3-state ports are in BUF mode, we fixed the T1 -> CLK timing checks.

The Relative Min Factors will no longer be applied to the IDELAY component delays. The default delay for the IDELAY component was increased to produce a negative or zero hold time.

The Relative Min Factor has also increased by 15% for the appropriate components and delays.

The master and slave sides of differential inputs are fixed to match each other.
AR# 20422
日期 03/27/2007
状态 Archive
Type 综合文章
的页面