UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20759

ModelSim Xilinx Edition (MXE) 5.8c - "# ** Error: (vsim-11) Could not find C:\Modeltech_xe\win32xoem/../xilinx/vhdl/simprim.dcm_clock_divide_by_2"

描述

Keywords: DCM, timing simulation

Urgency: Standard

General Description:
When I run a timing simulation with a DCM, the following error occurs:

"# ** Error: (vsim-11) Could not find C:\Modeltech_xe\win32xoem/../xilinx/vhdl/simprim.dcm_clock_divide_by_2"

Why does this error occur?

解决方案

This error message is caused by a problem with the Marked Libraries for MXE 5.8c Service Pack 3.

There is a patched version of the SimPrim libraries available at:
http://www.xilinx.com/txpatches/pub/swhelp/mentor/mxe5.8c_6.3isp3_simulation_libraries_simprims_patch.zip

NOTE: Do not use this patch with any other version of MXE.
AR# 20759
日期 10/17/2006
状态 Archive
Type 综合文章
的页面