We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20905

7.1i ISE - ChipScope inserter is given the wrong input netlist if called from Project Navigator when the Synplify-HDL flow is selected


Keywords: Project Navigator, inserter, ChipScope, netlist, incorrect, passed, EDN, NGC, edn, ngc

Urgency: Standard

General Description:
In 7.1i Synplify-HDL flow using ChipScope Inserter, the wrong netlist name is passed to ChipScope. Instead of passing the input netlist name "my_design.edn", it passes "my_design.ngc".


The NGCBuild program that is called by the ChipScope Core Inserter tool will look for the ".edn" extension after it fails to find the ".ngc" extension. ChipScope Inserter catches and corrects this problem.

This problem has been fixed in the latest 7.1i Service Pack available at:
The first service pack containing the fix is 7.1i Service Pack 2
AR# 20905
日期 12/13/2006
状态 Archive
Type 综合文章