We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21051

10.1 Floorplanner - How do I create an RPM with block RAMs?


I want to create an RPM in my device that contains some slice logic and a block RAM component. Can I do this?


In older architectures like Virtex-E (pre Virtex-II), you cannot use RLOC constraints on block RAMs. These devices used the column/row-based coordinates instead of SLICE/BRAM/MULT X,Y coordinates.

Also, RPM_GRID is not supported in older architectures. You can use RPM_GRID for Vritex-II and newer architectures, but this must be done by hand as Floorplanner does not support RPM_GRID. The best solution is to use LOC constraints for the block RAM.

AR# 21051
日期 12/15/2012
状态 Active
Type 综合文章