UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21089

7.1i XST - "ERROR:HDLCompilers:175 - Source file <>does not exist"

描述

Keywords: Verilog, include, core, CORE Generator

When I have COREGen cores in a different directory than the root project location, XST issues errors indicating that it cannot find the cores. When I set the "Verilog Include Directory", XST still cannot find them. I did not have this problem in 6.3i, but in 7.1i, the following errors occur:

"ERROR:HDLCompilers:175 - Source file mem1.v does not exist
ERROR:HDLCompilers:175 - Source file mem2.v does not exist
Analysis of file <"top.prj"> failed."

解决方案

This problem occurs because the PRJ file is not written out correctly. Open the PRJ file ("top.prj" in this case) and note the incorrect locations to these Verilog files:

verilog work "mem1.v"
verilog work "mem2.v"

To solve this issue, change to the following correct locations:
verilog work "../IP/mem1.v"
verilog work "../IP/mem2.v"

You can also simply copy these files to the root project directory.

This problem has been fixed in the latest 7.1i Service Pack available at:
http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 7.1i Service Pack 3.
AR# 21089
日期 01/07/2009
状态 Archive
Type 综合文章
的页面