We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21118

PLB EMC - I cannot execute application code out of external memory using plb_emc Core


General Description:

I cannot run applications out of SRAM using the plb_emc_v2_00_a Core. The memory test passes and I can read/write to the memory using XMD, but I cannot run a program from SRAM after loading it with XMD. I have tried this on both Virtex-4 and Virtex-II Pro boards, but I still cannot run a program out of SRAM.


The problem with running the code from SRAM has to do with some parameters not being set correctly on the plb_emc Core.

To run an application from SRAM via the plb_emc_v2_00_a Core, enable cacheline bursts; you can do this by setting C_INCLUDE_BURST_CACHELN_SUPPORT = 1 (default is 0).

Data width matching must also be enabled because the device you are interfacing to is 32-bits, and you are interfacing to it from the plb bus, which is 64-bits. To enable data width matching, set C_INCLUDE_DATAWIDTH_MATCHING_0 = 1.

AR# 21118
日期 12/15/2012
状态 Active
Type 综合文章