UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2119

FPGA Configuration: Device seems to be in bypass mode and will not configure.

Description

KEYWORDS:

FPGA, Configuration, bypass, cclk, daisy chain, noise, ringing

URGENCY:

Standard

GENERAL PROBLEM DESCRIPTION:

Device(s) in daisy chain seems to be in bypass mode and will

not configure properly.

The device(s) having problem can be any where in the chain and

can be one or multiple devices within the chain. You may

noticed that configuration data going in at DIN is coming right

out from DOUT one cclk cycle later, indicating that the device

is already full when it has not been configured yet.

解决方案

Using logic analyzer or scope, check the signal on cclk near

the device having problem. A noise or ringing on cclk may be

the cause of this problem. In order to reduce the

noise/ringing, try adding 30-50 shunt capacitor on the cclk

line.

Also, refer to Configuration Guideline Application note in the PFGA Databook for more debugging tips related to configuration problem.

AR# 2119
创建日期 08/21/2007
Last Updated 05/08/2014
状态 Archive
Type 综合文章