UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2140

Foundation: Difference between I/O Pads and I/O Terminals

Description

Keywords: ipad opad iopad Terminal

Urgency: Standard

General Description:
What is the difference between the I/O terminals found on
the toolbar in the Schematic Editor, and the I/O pads found
in the Xilinx libraries?

解决方案

I/O Terminals
-------------
These are placed by clicking on the I/O Terminal button on
the Toolbar on the left-hand side of the Schematic Editor
window.

I/O terminals should ONLY be used in macros to connect
signals to the corresponding pins on the macro symbol.
They provide the connection between levels of hierarchy
in the design.

If an I/O terminal is placed on a top-level schematic, it
MIGHT be treated as an I/O pad by the software. But in
some cases, the terminal will not be treated as an I/O pad.
For this reason, I/O terminals should not be used on any
top-level schematic. Signals that span multiple pages of
a flat design do not require terminals or off-page
connectors.


I/O Pads
--------
These are components from the Xilinx Unified Library, and
are placed just as you would add components like AND
gates, flip-flops, etc. They are called IPAD, OPAD,
IOPAD, IPAD4, OPAD4, etc.

These may be used on any level of hierarchy. They represent
the actual pins of the Xilinx device. All device pins MUST
be represented with I/O Pads, not I/O Terminals.
AR# 2140
创建日期 04/28/1997
Last Updated 08/12/2003
状态 Archive
Type 综合文章