We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21456

7.1i ChipScope Pro - "ERROR: Cse abort command"


General Description: 

When ChipScope Analyzer 7.1 tries to connect to the cable, the following error message occurs : 


"COMMAND: open_parallel_cable PROXYTYPE=xilinx_parallel4 FREQUENCY=200000 PORT=LPT1  

INFO: Cable connection established. 

INFO: Using download cable in compatibility mode. 

ERROR: Cse abort command 

INFO: Successfully opened Xilinx Parallel Cable 

INFO: Cable: Parallel Compatibility Mode, Port: LPT1, Speed: 200 KHz 

ERROR: Cse abort command 

INFO: Found 0 Core Units in the JTAG device Chain."


This has been fixed in the first service pack of ChipScope Pro 7.1.

AR# 21456
日期 05/19/2014
状态 Archive
Type 综合文章