We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21697

LogiCORE SPI-3 (POS-PHY L3) - How are the SPI-3 cores affected by the new Virtex-4 DCM parameter requirements?


General Description: 

How are the SPI-3 cores affected by the new Virtex-4 DCM parameter requirements? 


The requirements of the new DCM parameters for Virtex-4 are explained in (Xilinx Answer 21127).


The SPI-3 Link Layer Core v2.x with fixed channel netlists (1-ch, 2-ch, 4-ch) cores do not support the Virtex-4 Family; therefore, these cores are not affected. 


The SPI-3 Link Layer Core v3.2 with multi-channel support does NOT contain embedded DCMs within the core; therefore, the core itself is not affected. However, the design example does contain DCMs in the top-level design file, which will be affected if you were to use this design example in hardware. The files that contain DCMs are: 








The two DCMs used in the top-level design file are called "TFClk_dcm0" and "RFClk_dcm0". If you would like to use these files for board-level testing, see (Xilinx Answer 21127) to incorporate the DCM_STANDBY macro for each DCM used within the design.

AR# 21697
日期 05/19/2014
状态 Archive
Type 综合文章