We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21807

7.1i Virtex-2 MAP - Area Group summary fails to list ranges for all component types.


General Description:

I have assigned some Multipliers to an area group and have defined a range constraint for the area group. When I examine the area group summary of the MAP report file (.mrp), there appears to be no range associated with the area group. Why is that?

This is strictly a reporting issue with the MAP report file. If you examine the physical constraints file (.pcf) written by MAP, you will find that the MULTIPLIER range constraint was handled successfully. The area group summary section of the MAP report reports only SLICES, TBUFs, and block RAMs at this time. This is true for Virtex-II, Virtex-II PRO, and Spartan-3 devices.

AREA_GROUP rgn1_mult

No RANGE specified for AREA_GROUP rgn1_mult

No COMPRESSION specified for AREA_GROUP rgn1_mult

After running though PLACE and ROUTE, the block MULT is being put in the correct place; however, it appears that this might just be chance.


This problem is currently scheduled to be fixed in version 8.2i.

AR# 21807
日期 12/15/2012
状态 Active
Type 综合文章