UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21930

7.1i iMPACT - iMPACT will not program the XCF00P PROM if the revisioning has not been turned on

描述

General Description: 

iMPACT will have problems programing the XCFP PROMS (08, 16, or 32) if the design revisioning has not been turned on.

解决方案

It is always best to be using the latest version on iMPACT when operating on these devices. iMPACT 7.1 through 7.1.03 has had problems programing the XCF00P PROMs when design revisioning was not turned on.  

 

This issue has been fixed in Service Pack 4. 

 

The files can also be regenerated with the design revisioning enabled. Leaving all of these settings to the defaults will allow programing and usage of these parts without the design revisioning features. This flow will enable the advanced features of the PROM and create a ".cfi" file. This file is required for iMPACT to function properly on these devices.

AR# 21930
日期 05/19/2014
状态 Archive
Type 综合文章
的页面