UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21972

8.2i XPower CoolRunner-II - VCCIO power estimate figures are not being reported for CRII devices

描述

In 7.1i XPower, VCCIO power estimate figures are not being reported for CoolRunner-II device flow; only core power is being reported. This is a bug specifically affecting designs that target CoolRunner-II parts. This is not the case for FPGA targets.

解决方案

The issue is scheduled to be fixed in 9.1i.

Until this bug is fixed, an alternative that can be used in order to estimate power on VCCIO is using the following formula:

Power = # of outputs x frequency (in MHz) x (0.01 + external capacitance load in uF) x VCCIO x VCCIO

So, for 10 outputs at 100 MHz at LVCMOS25 would be with a 5pF (= 0.005 uF) external load 10 x 100 x (0.01+0.005) x 2.5 x 2.5 = 93.75 mW.

AR# 21972
日期 12/15/2012
状态 Active
Type 综合文章
的页面