We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21973

LogiCORE SPI-4.2 (POS-PHY L4) Lite v3.0 - Generating the core gives ERROR:coreutil - Parameter c_snk_af_thres_assert value 1 is outside the range 6 to 508


General Description: 

Although the GUI allows you to select a range of 1-506 for the sink and source almost full threshold value, if you select the value less than 6, the CORE Generator will give following error: 


"ERROR:coreutil - Parameter c_snk_af_thres_assert value 1 is outside the range 6 to 508."


To work around this issue, enter the threshold values greater than 6 for Almost Full Assert on both the sink and source, and generate the core. Then, using a file editor, open the top wrapper file:  


... /example_design/<component_name>_top.v or ".vhd" file and change the static configuration values to your desired setting. 


The section of the file you will need to edit is as follows: 



// The following signal instantiations are the Static Configuration signals. 


assign LoopbackEn_n = 1'b0; 

assign NumDip4Errors = 4 ; 

assign NumTrainSequences = 4 ; 

assign NumDip2Errors = 4 ; 

assign NumDip2Matches = 4 ; 

assign SnkAFThresAssert = 32 ; <===  

assign SnkAFThresNegate = 32 ; <===  

assign SrcAFThresAssert = 32 ; <=== 

assign SrcAFThresNegate = 32 ; <===

AR# 21973
日期 05/19/2014
状态 Archive
Type 综合文章