AR# 2224


VERILOG-XL: Error! Module (...) has a `timescale directive but previous modules do not


Keywords: Verilog, Verilog-XL, timescale

Urgency: Standard

General Description:
When simulating with Verilog-XL, what does the following error mean:

Error! Module (...) has a `timescale directive but previous modules do not


The `timescale compiler directive is optional. Designs that do not
contain this require no modification and the default of 1 ns / 1 ns is used.
However, if the design includes a `timescale compiler directive for any
module definition, then all other modules definitions require this as well.
Otherwise, Verilog-XL flags this as an error.

The `timescale can be declared in any file.

The UNISIMS has 100ps / 10ps.
The SIMPRIMS has 1ps / 1ps.
The glbl.v has 100ps / 10ps.

The smallest precision of all the timescale directives determines the time
unit of the simulation. For example,

`timescale 1 ns / 10 ps
module1 ();

`timescale 100 ns / 1 ns
module2 ();

`timescale 1 ps / 100 fs
module3 ();

The first timescale indicates that the time units for module1 are in multiples
of 1 ns and it is precise to 10 ps. Thus, the smallest timestep for the
simulator is 10 ps.

The second timescale is 100 ns / 1 ns. Since 1 ns is greater than 10 ps,
the smallest timestep remains 10 ps.

The third timescale is 1 ps / 100 fs. Since 100 fs is smaller than 10 ps,
the smallest simulator timestep now becomes 100 fs.

AR# 2224
日期 05/05/2004
状态 Archive
Type 综合文章
People Also Viewed