UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22253

Spartan-3E - Design tool requirements for production stepping silicon

描述

How do I target a Spartan-3E production stepping device in the ISE design tools?

解决方案

No special input to the design tools is necessary to target stepping Spartan-3E parts. The CONFIG STEPPING constraint does not need to be set. The only design tool requirement is that production applications must be implemented using production speed files. For more information on the status of production speed files, see (Xilinx Answer 22037). No special software settings are needed to target production stepping devices. Consequently, you must be aware of the limitations of Stepping 0 silicon. For more information on stepping specifications, see the Spartan-3E Data Sheet located at:

http://www.xilinx.com/xlnx/xweb/xil_publications_display.jsp?sGlobalNavPick=&sSecondaryNavPick=&category=-1211407&iLanguageID=1

For more information on known issues affecting Spartan-3E in ISE 8.1i, see (Xilinx Answer 22632).

For more information on known issues affecting Spartan-3E in ISE 7.1i, see (Xilinx Answer 20813).

AR# 22253
日期 12/15/2012
状态 Active
Type 综合文章
的页面