UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22457

8.1i ISE/EDK - Problems with PlatGen when not all device files are installed

描述

Errors are issued during PlatGen when not all device files are installed.

解决方案

If the complete set of device files are not installed when installing ISE, EDK produces unexplainable errors during PlatGen. The following are examples of errors that can occur: 

 

"Elaborating instances ... 

bram_block (bram_block_0) - C:\am\ise\edk_part\edk_part.mhs:252 - elaborating IP 

This application has discovered an exceptional condition from which it cannot recover. 

make: *** [implementation/microblaze_0_wrapper.ngc] Error 1 

Done." 

 

"ERROR:MDT - BRAM_Din_A - connector index is out of VEC range, [0:63]" 

 

To solve this issue, make sure that all device files are installed.

AR# 22457
日期 05/19/2014
状态 Archive
Type 综合文章
的页面