UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22567

XST - When I try to synthesize a design, the following error occurs: "ERROR:Xst:1817 - Invalid target speed '-10'"

描述


When I compile a design to Virtex-4 (previous Virtex-II Pro), after I have changed CONFIG PART in ucf, XST halts with the following error message:



ERROR:Xst:1817 - Invalid target speed '-10'

解决方案


This error occurs if the device files are not installed correctly.



To double-check the files, run xinfo and look for "summary= selected: <device_name>".



If the device you are targeting cannot be found, then re-install the ISE CD/DVD with that device selected.
AR# 22567
日期 10/05/2011
状态 Archive
Type 综合文章
的页面