UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22638

Virtex-4 - SelectMAP32 required constraints and persist settings

描述

When the SelectMAP32 configuration setting is used on a Virtex-4 device, what are the software settings required for this feature?

解决方案

There is a MANDATORY constraint that must be applied to all designs using SelectMAP32. This is the CONFIG MODE constraint and is documented in the Constraints Guide. What the Constraints Guide does not outline are the constraints for the SelectMAP32 settings.

The basic UCF syntax is:

CONFIG CONFIG_MODE=<pick one of the two items below>;

S_SELECTMAP32 - Slave SelectMAP32 Mode

S_SELECTMAP32+READBACK - Slave SelectMAP Mode with Persist set to support

Readback and Reconfiguration.

These constraints allow for proper padding to be added to the bit file and, if desired, allow the configuration pins to persist.

AR# 22638
日期 12/15/2012
状态 Active
Type 综合文章
的页面