We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2274

M1 MAP: Designs which fit a target XC4000/E/L device in XACT may not fit when mapped with the M1 Mapper due to register ordering


Keywords: fit overmap register ordering 4000 -r utilization

Urgency: standard

General Description:

Reference Number: 16695
Some designs which fit a specific XC4000/E/L device in XACT
may not fit the same device when mapped with the M1 Mapper.
One possible reason for this may be the fact that the
M1 Mapper turns on register ordering by default. In designs
containing registers, this may over-constrain the Mapper in
such a way that it no longer has sufficient flexibility to
achieve the optimal packing density for the design


If the reason for the higher resource utilization is due
to register ordering, you can easily get around this by
reprocessing your design through Map with register
ordering disabled by specifying the -r option:

map -r design.ngd

AR# 2274
创建日期 06/07/1997
Last Updated 04/30/1999
状态 Archive
Type 综合文章