UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22819

8.1i iMPACT - Swap bits is always true when generating HEX PROM file

描述

In iMPACT 8.1, when generating generic HEX file format, the "swap bits" function is always enabled regardless of the state of the check box. Even after loading a CDF file with "Swap bits" set to FALSE, the HEX file is generated with swapped bits. The PROM file properties shows the box checked, and unchecking the box has no effect.

解决方案

The problem is that the iMPACT GUI or batch mode will not execute the correct PROMGen command line:

promgen -w -p hex -c FF -o output_file.hex -u 0 input_file.bit

promgen -w -p hex -b -c FF -o output_file.hex -u 0 input_file.bit

The PROMGen command line options are explained further in the PROMGen section of the Development System Reference Guide:

http://www.xilinx.com/support/software_manuals.htm

There are two ways to work around this problem:

1. Use iMPACT 7.1.04i

2. Run PROMGen from the command line.

This issue is scheduled to be fixed in ISE 8.2i.

If you need further assistance with this problem, open an online WebCase with Xilinx Customer Support at: http://www.xilinx.com/support/clearexpress/websupport.htm

AR# 22819
日期 12/15/2012
状态 Active
Type 综合文章
的页面