We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22929

LogiCORE SPI-4.2 (POS-PHY L4) v6.3 - Migrating from v6.2 to v6.3 (Migration Guide)


This Answer Record shows how to migrate the SPI-4.2 Core from v6.2 to v6.3, and describes the signal changes made to the core. Every attempt was made to keep constraints, input, and output signals consistent between versions. This Answer Record covers those modifications required to upgrade from v6.2 to v6.3.  


The following sections are included: 


- Core Signal Changes 

- Wrapper File Changes 

- UCF and NCF File Changes


Core Signal Changes 

There were no changes made to signal names between v6.2 and v6.3.  


Wrapper File Changes 

There were no changes made to the wrapper file. However, to ensure that you are using the correct static configuration signal settings, use the new wrapper file generated with the v6.3 Core. 


UCF and NCF File Changes 

The UCF and NCF files have been updated. Replace the v6.2 UCF and NCF files with the v6.3 UCF and NCF files, along with the v6.3 EDF netlists.

AR# 22929
日期 05/20/2014
状态 Archive
Type 综合文章