We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22931

LogiCORE SPI-4.2 (POS-PHY L4) v6.3 - Source core continuously sends training pattern when DataMaxT is 1 to 15


The Source core sends continuous training pattern without sending data, even though the core is in-frame and the data is written into the source FIFO. This issue occurs if DataMaxT is set to 1 to 15.


DataMaxT values between 1 and 15 are not supported, although the GUI allows you to generate cores with DataMaxT set to these ranges. This range of number of SPI-4.2 bus cycles between periodic training patterns is not supported in this release. Use the valid range "0," or "16 to 65535. " Note that setting DataMaxT to "0" configures the core to never send periodic training.

AR# 22931
日期 05/20/2014
状态 Archive
Type 综合文章