UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22991

8.1i iMPACT - '2': Verification terminated due to errors but iMPACT GUI reports "Verify Succeeded"

描述

When verifying with iMPACT several CPLDs simultaneously, iMPACT reports the following:

Command: Verify -p 0 1 2 3 4

// *** BATCH CMD : Verify -p 1 2 3 4 5

PROGRESS_START - Starting Operation.

Chain TCK freq = 10000000.

Validating chain...

Boundary-scan chain validated successfully.

'1': Verifying device...

done.

'1': Verification completed successfully.

'2': Verifying device...

'2': Verification terminated due to errors

'2': Failed at address 40.

'2': Verification terminated due to errors

'3': Verifying device...

'3': Verification terminated due to errors

'3': Failed at address 0.

'3': Verification terminated due to errors

'4': Verifying device...

done.

'4': Verification completed successfully.

'5': Verifying device...

done.

'5': Verification completed successfully.

PROGRESS_END - End Operation.

However, on the iMPACT GUI, iMPACT shows "Verify Succeeded".

解决方案

To work around this issue, verify the CPLDs one by one.

This is scheduled to be fixed in ISE 8.2i.

AR# 22991
日期 12/15/2012
状态 Active
Type 综合文章
的页面