UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23098

9.1i ISE - Unable to invoke Synplify Pro from Project Navigator; "expr: command not found" message occurs

描述

Keywords: Synthesis, 8.4.0, Linux

I cannot synthesize with Synplify Pro from Project Navigator on the Linux platform. When I perform synthesis, the following error occurs:

"Started: "Synthesize - Synplify Pro".
/ecad/synplify/fpga_84/bin/synplify_pro: line 1: expr: command not found
/ecad/synplify/fpga_84/bin/synplify_pro: line 1: sed: command not found
/ecad/synplify/fpga_84/bin/synplify_pro: line 1: sed: command not found
/ecad/synplify/fpga_84/bin/synplify_pro: line 1: expr: command not found
/ecad/synplify/fpga_84/bin/synplify_pro: line 1: expr: command not found
/ecad/synplify/fpga_84/bin/synplify_pro: line 11: /bin/config/platform_set: No such file or directory

Process "Synthesize - Synplify Pro" failed"

解决方案

This problem can be caused by a double colon before the /bin directory in the PATH. To resolve this issue, remove the double colon in the path as in the following example:

Example

Incorrect:
PATH: ../bin::.:/usr/bin:/bin:/

Correct:
PATH: ../bin.:/usr/bin:/
AR# 23098
日期 04/16/2009
状态 Archive
Type 综合文章
的页面