UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2342

*obsolete* M1.3 JTAG Programmer: Output -> Cable Setup breaks cable connection

Description

Keywords: JTAG Programmer, Parallel Download Cable, Cable
Setup

Urgency: Standard

General Description:

If you select Cable Setup from the Output menu in the JTAG
Programmer software GUI, it will not be able to find the
connected cable, and will actually lose the connection of the
cable, even though connection may have already been
established.

解决方案

Return the JTAG Programmer to AUTO connect mode by selecting
Output->Reset Cable. You should now see the cable type shown
in the lower-right corner of the GUI.
AR# 2342
创建日期 06/07/1997
Last Updated 09/07/2005
状态 Archive
Type 综合文章