UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23476

10.1 Floorplanner - Virtex/-E, Spartan-II/-IIE AREA_GROUP name does not match between Instances and Range

描述

Floorplanner was used to create an AREA_GROUP for some of the logic in my design. When I look at the UCF constraints generated by Floorplanner, the AREA_GROUP name for the instances do not match the AREA_GROUP name for the range similar to the example below.  

 

Example constraint from UCF: 

 

AREA_GROUP "AG_GRP0" RANGE = CLB_R1C4:CLB_R2C5 ; 

INST "counter2/COUNT_3" AREA_GROUP = "GRP0" ; 

INST "counter2/COUNT_2" AREA_GROUP = "GRP0" ; 

INST "counter2/COUNT_1" AREA_GROUP = "GRP0" ; 

INST "counter2/COUNT_0" AREA_GROUP = "GRP0" ;

解决方案

To work around this issue, edit the text of the ".ucf" to make the AREA_GROUPs match. The correct example is below. 

 

Corrected sample constraint from ".ucf": 

 

AREA_GROUP "AG_GRP0" RANGE = CLB_R1C4:CLB_R2C5 ; 

INST "counter2/COUNT_3" AREA_GROUP = "AG_GRP0" ; 

INST "counter2/COUNT_2" AREA_GROUP = "AG_GRP0" ; 

INST "counter2/COUNT_1" AREA_GROUP = "AG_GRP0" ;

AR# 23476
日期 05/20/2014
状态 Archive
Type 综合文章
的页面