UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23640

8.2i Virtex-5 PAR - Performance Evaluation Mode leads to unrouted design due to over constraining

描述

I have noticed that my design is unroutable when I tell PAR to ignore my timing constraints (-x), but it runs okay if I do not. Wouldn't it normally be more difficult to both satisfy timing constraints and route a design, than to just route it? 

 

This option is referred to as Performance Evaluation Mode and involves the automatic constraint of all clocks. Several cases have been seen where this automatic constraining process over-constrains the design, which can lead to routing failures. 

 

If the goal is to disable timing driven operation entirely, the hidden PAR switch "-ntd" can be used instead.

解决方案

This problem has been fixed in the latest 8.2i Service Pack available at: 

<http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp>
The first service pack containing the fix is 8.2i Service Pack 1.

AR# 23640
日期 05/20/2014
状态 Archive
Type 综合文章
的页面