UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24900

9.1i Tcl - Project partitions for an EDIF-based project are not completely removed using the "partition delete" Tcl command

描述

Keywords: EDIF, Synplify, Precision, close, reopen

The partition delete command appears to work properly on an EDIF-based design (search * -type partition indicates the partition has been removed). However, after the project is closed and reopened, the partitions are still there.

解决方案

The "partition delete" command should not be allowed on partitions that are on EDIF design units, as these partitions should only be created and deleted in the third-party synthesis tool.

The "partition delete" Tcl command has been fixed to correctly reflect this limitation in the message returned in this situation.

This problem has been fixed in the latest 9.1i Service Pack available at:
http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 9.1i Service Pack 3.
AR# 24900
日期 04/17/2009
状态 Archive
Type 综合文章
的页面