UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25242

11.1 EDK - How do I configure my FPGA with Intel Strata Flash?

描述

How do I configure my FPGA with Intel Strata Flash?

解决方案

Follow the steps below:

1. Generate your bitstream ("download.bit" file).

2. Use the following command to create the bin file:

promgen -w -p bin -u 0 ../implementation/download.bit -o download.bin

3. In XPS, go to Device configuration -> Program Flash Memory using the newly created "download.bin" file.

4. Change J30 jumper settings on your board to BPI Up mode.

5. Press "Prog" button on the demo board to program your device.

AR# 25242
日期 12/15/2012
状态 Active
Type 综合文章
的页面