The names of bus pins on Logiblox symbols bus are not shown on the schematic by default.
解决方案
1
Foundation F1.3 ===============
To enable the bus pin names globally, a switch must be added to the SUSIE.INI file. To edit this file, select File -> Configuration from the Project Manager, and hit the "View INI File" button. At the bottom of the file add these lines:
[Logiblox] show_pinbus_names=yes
This will not affect any Logiblox components already created. Re-run Logiblox from the Project Manager Tools menu to see the bus pin names appear on the schematic.
2
Foundation F1.4, F1.5 =================
To enable the bus pin names globally, select File->Configuration from the Project Manager. Place a check in the box next to "Display LogiBLOX bus pin names."
This will not affect any Logiblox components already created. Re-run Logiblox from the Project Manager Tools menu to see the bus pin names appear on the schematic.