AR# 2603

4.2i Foundation Schematic, LogiBLOX - Changes to LogiBLOX symbol parameters on a Foundation schematic are not recognized


Keywords: LogiBLOX, parameters

Urgency: Standard

General Description:
The changes I made to LogiBLOX parameters via the "Symbol Properties" dialog box in Schematic Editor are not recognized.


The LogiBLOX GUI is available via the Schematic Editor. To change the parameters of a LogiBLOX symbol:

- Double-click on the already-placed LogiBLOX symbol on the schematic, then select "Configure LogiBLOX Symbol".
- The LogiBLOX Module Selector dialog box will appear; make the desired changes.
- Recreate the LogiBLOX component.

NOTE: If you wish to change only this single component instance (i.e., there are other instances on the schematic), rename the new module with unique name.
AR# 2603
日期 08/12/2003
状态 Archive
Type 综合文章