We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2657

Synopsys FPGA/Design Compiler - "Error: The entity 'add_sub_ub' depends on the package 'std_logic_arith' which has been analyzed more recently..."


Keywords: LBR-28, OPT-100, simulation, libraries, DesignWare

Urgency: Standard

General Description:
When I am compiling a VHDL or Verilog design for Synopsys, the following error occurs:

"Error: The entity 'add_sub_ub' depends on the package 'std_logic_arith'
which has been analyzed more recently.
Please re-analyze the source file for 'add_sub_ub' and try again. (LBR-28)
Information: Compile terminated abnormally. (OPT-100)"

What does this error mean?



This error usually means that the DesignWare and Simulation Libraries are older than the current version of Synopsys, and they need to be re-compiled. For additional information on how to re-compile DesignWare and Simulation libraries, refer to (Xilinx Answer 1189).


Another possible cause of this problem is that the define_design_lib and synthetic_library variables in the ".synopsys_dc.setup" file are not consistent. For example, if the define_design_lib and synthetic_library are set:

define_design_lib xdw_4000ex -path /path1/path2/xc4000ex
synthetic_library = {xdw_4000e.sldb standard.sldb}


define_design_lib xdw_4000ex -path /path1/path2/xc4000e
synthetic_library = {xdw_4000ex.sldb standard.sldb}

In the first case, the define_design_lib is pointing to XC4000ex XDW, but the synthetic_library is pointing to the XC4000E .sldb file.

In the second case, the synthetic_library is okay, but the define_design_lib is pointing to the XC4000E XDW files, instead of the XC4000EX. Make sure your variables are consistent. Either use the example ".synopsys_dc.setup" files in "$XILNX/synopsys/examples," make sure XC4000E path and files are used together, or make sure XC4000EX path and files are used together.
AR# 2657
日期 04/27/2007
状态 Archive
Type 综合文章