UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2772

FATAL_ERROR:basnc:basncsignal.c:262:1.61 mapping with -k switch

Description

FATAL_ERROR:basnc:basncsignal.c:262:1.61 - Could not find a bel for a signal on pin C1 of comp u0/u1/u1/modgen_0_ax_duplicate_name_0_CINt.

The error is dependent on use of the -k switch
(map to 5-input functions)

解决方案

For this particular case, map runs okay when the -k switch
is not used. There are other known cases of this Fatal Error
that are unrelated to the -k switch. If the error message
mentions "pin C1" there is a good chance the the -k switch
is involved.
AR# 2772
创建日期 08/31/2007
Last Updated 10/06/2008
状态 Archive
Type 综合文章