UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2874

XACTstep wir2xnf 5.2.1 may fail with WIR files created by Powerview 6.1

Description

Keywords: Powerview 6.1, wir2xnf 5.2.1, line continuation character, +

Urgency: Standard

General Description:
Viewlogic has made a change in the WIR file format with Powerview 6.1. Long
lines can be truncated into multiple lines by the use of a continuation
character. When WIR2XNF 5.x attempts to translate this file, it complains
that it does not understand the continuation character. The character is a "+".

解决方案

In your viewdraw.ini file for this project, make sure the following line does
not exist:

|5.0 WIR_CONT_CHAR 1

If this is removed, the WIR files will not have the continuation character and
WIR2XNF will proceed as expected.
AR# 2874
创建日期 10/01/1997
Last Updated 01/12/2003
状态 Archive
Type 综合文章