We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2960

*Obsolete* M1.3 JTAG Programmer: Communications with the cable could not be established


Keywords: cable setup, autoconnect, parallel cable, xchecker, jtag cable

Urgency: Standard

General Description:
If you upon invoking the JTAG Programmer try to connect to the cable through the Output -> Cable Setup menu, you will get a popup with an error message saying " Communications with the cable could not be established."


Exit the JTAG Programmer. Re-invoke it and do Output -> Cable Autoconnect. It is the only known way to connect to the cable with the M1.3 software.

If you try to change the cable type during a session, the JTAG Programmer will not be able to connect to the cable. In fact it will break the already existing connection.
AR# 2960
日期 09/26/2005
状态 Archive
Type 综合文章