UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3082

CPLD : XC9500: obtaining Fcnt (operating freq for 16 bit counters)

Description

Uregency: Standard

General Description:

Obtaining this frquency may be impossible if the user tries to use the bits of the counter (as outputs, or to drive other logic). If the user wants to output the bits of the counter they may run out of i/o. The problem arises because in some packages not all the macrocells have i/o. Some of them are buried (they have a (b) in the fitter report). For example, if a 95108pc84-7 is targeted, the largest counter that can implemented at Fcnt is 12 bits. The remaining 4 bits must be routed through other function block(s) to get to available i/o. This will drop the freq from 125 (Fcnt) to 83.3 (Fsystem).

解决方案

To avoid this problem, target a device/package that has enough i/o per function block for the counter you need.

AR# 3082
创建日期 08/21/2007
Last Updated 12/15/2012
状态 Active
Type 综合文章