UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3085

M1.3: TIMING: Page Fault in Win95, FATAL_ERROR:baspp:basppphys on Workstations

Description


Keywords: Timing, Backannotation, NGDANNO, NGD2EDIF, Page Fault, Fatal Error,
LIBBASNG.DLL, baspp, basppphys
Urgency: Standard
General Description:

Occasionally when backannotating the netlist with timing simulation data,
PCs will get the following Windows95 error:

NGD2EDIF caused an invalid page fault in module LIBBASNG.DLL at 0137:0048365b.
<<Then there are a bunch of registers and byte values.>>

Workstations will get this error:

FATAL_ERROR:baspp:basppphys.c:684:1.20 - Sanity Error, No jump made across
inverter. Process will terminate. Please call Xilinx support.

解决方案


This is a result of correlating the mapped functional simulation netlist with
the routed timing simulation netlist. This correlation is typically done to
preserve net names for the timing simulation because many nets get collapsed or
trimmed during place and route.

Correlation occurs in NGDANNO when the NGM file is included on the command line.

Currently, the only workaround for the above errors is to turn off this
correlation.

From the Design Manager, choose Implement. Click on the "Options" button and
choose to edit the Implementation Template. Under the Interface tab, deselect
the option that says "Correlate Simulation Data to Input Design".

Now you should be able to back up in the flow engine and re-run the Timing
portion of the flow. You can verify that the tools are not correlating the
simulation data to the original design by looking for the call to NGDANNO
and making sure that the NGM file is not included on the command line.
AR# 3085
创建日期 08/31/2007
Last Updated 04/05/2000
状态 Archive
Type ??????