We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3111

M1.4 PAR - Turns engine requires explicit use of -pl and -rl switches to work.


The Turns Engine feature of PAR will fail in M1.4 unless
the switches -pl and -rl are used explicitly on the command
line or if the Design Manager is being used, specified using
the Template Manager.

The -pl and -rl are new switches for M1.4 that specify
Placement Effort Level and Router Effort Level. Valid values range from 1 to 5.


For command line use, specify -pl and -rl in the command:
par -m nodelist.txt -pl 5 -rl 5 design.ncd out.dir design.pcf

For Design Manager usage, the Template Manager can be used
to add the -pl and -rl switches to the par command line:

Choose: Template Manager -> Customize
Set Program Name to "par".
Set Program Options to "-pl 5 -rl 5".

AR# 3111
日期 10/20/2008
状态 Archive
Type 综合文章