During program execution the HW130 software displays the following error message:
Device FAILED to Verify Addr = XXXX Data = XXX
The program finally fails due to a checksum failure.
There is a bug with v4.1.0 of the hw130 software. The fix is to obtain the latest version from the following location on the Xilinx website:
http://www.xilinx.com/support/troubleshoot/htm_index/sw_programmer.htm
AR# 3160 | |
---|---|
日期 | 12/15/2012 |
状态 | Active |
Type | 综合文章 |