AR# 31635


Endpoint Block Plus Wrapper v1.9 for PCI Express - Fails to link train in Gen 2 Motherboard when receiver polarity is reversed


Known Issue: v1.9, v1.8, v1.7.1, v1.6.1

If the receiver serial lines are polarity reversed, the core might fail to link train in a Gen 2 slot.

Is there a fix for this?


This problem occurs only if all three of the following conditions are met:

1. Endpoint is plugged into a GEN 2 slot.

2. Any of the Endpoint lanes receiving serial lines is polarity reversed.

3. The motherboard is setting the Autonomous Change Bit in the TS1/TS2 ordered sets.

A fix for this issue is available in the v1.9 Rev 1 patch. See (Xilinx Answer 31572) for access to the patch.

Revision History

01/07/2009 - Added Patch Availability.

09/10/2008 - Initial Release.

AR# 31635
日期 12/15/2012
状态 Active
Type 综合文章
People Also Viewed